File Manager Sederhana

Nama	Ukuran	Izin	Aksi
Package	-	0755	-
Archive.pm	8.31 KB	0644	Edit Rename Delete
BinaryFiles.pm	4.91 KB	0644	Edit Rename Delete
Format.pm	4.21 KB	0644	Edit Rename Delete
Functions.pm	3.69 KB	0644	Edit Rename Delete
Package.pm	18.91 KB	0644	Edit Rename Delete
Patch.pm	22.27 KB	0644	Edit Rename Delete
Quilt.pm	11.32 KB	0644	Edit Rename Delete

Edit File:Quilt.pm

# Copyright © 2008-2012 Raphaël Hertzog <hertzog@debian.org>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <https://www.gnu.org/licenses/>.

package Dpkg::Source::Quilt;

use strict;
use warnings;

our $VERSION = '0.02';

use List::Util qw(any none);
use File::Spec;
use File::Copy;
use File::Find;
use File::Path qw(make_path);
use File::Basename;

use Dpkg::Gettext;
use Dpkg::ErrorHandling;
use Dpkg::Source::Patch;
use Dpkg::Source::Functions qw(erasedir chmod_if_needed fs_time);
use Dpkg::Vendor qw(get_current_vendor);

sub new {
    my ($this, $dir, %opts) = @_;
    my $class = ref($this) || $this;

my $self = {
        dir => $dir,
    };
    bless $self, $class;

$self->load_series();
    $self->load_db();

return $self;
}

sub setup_db {
    my $self = shift;
    my $db_dir = $self->get_db_file();
    if (not -d $db_dir) {
        mkdir $db_dir or syserr(g_('cannot mkdir %s'), $db_dir);
    }
    my $file = $self->get_db_file('.version');
    if (not -e $file) {
        open(my $version_fh, '>', $file) or syserr(g_('cannot write %s'), $file);
        print { $version_fh } "2\n";
        close($version_fh);
    }
    # The files below are used by quilt to know where patches are stored
    # and what file contains the patch list (supported by quilt >= 0.48-5
    # in Debian).
    $file = $self->get_db_file('.quilt_patches');
    if (not -e $file) {
        open(my $qpatch_fh, '>', $file) or syserr(g_('cannot write %s'), $file);
        print { $qpatch_fh } "debian/patches\n";
        close($qpatch_fh);
    }
    $file = $self->get_db_file('.quilt_series');
    if (not -e $file) {
        open(my $qseries_fh, '>', $file) or syserr(g_('cannot write %s'), $file);
        my $series = $self->get_series_file();
        $series = (File::Spec->splitpath($series))[2];
        print { $qseries_fh } "$series\n";
        close($qseries_fh);
    }
}

sub load_db {
    my $self = shift;

my $pc_applied = $self->get_db_file('applied-patches');
    $self->{applied_patches} = [ $self->read_patch_list($pc_applied) ];
}

sub save_db {
    my $self = shift;

$self->setup_db();
    my $pc_applied = $self->get_db_file('applied-patches');
    $self->write_patch_list($pc_applied, $self->{applied_patches});
}

sub load_series {
    my ($self, %opts) = @_;

my $series = $self->get_series_file();
    $self->{series} = [ $self->read_patch_list($series, %opts) ];
}

sub series {
    my $self = shift;
    return @{$self->{series}};
}

sub applied {
    my $self = shift;
    return @{$self->{applied_patches}};
}

sub top {
    my $self = shift;
    my $count = scalar @{$self->{applied_patches}};
    return $self->{applied_patches}[$count - 1] if $count;
    return;
}

sub register {
    my ($self, $patch_name) = @_;

return if any { $_ eq $patch_name } @{$self->{series}};

# Add patch to series files.
    $self->setup_db();
    $self->_file_add_line($self->get_series_file(), $patch_name);
    $self->_file_add_line($self->get_db_file('applied-patches'), $patch_name);
    $self->load_db();
    $self->load_series();

# Ensure quilt meta-data is created and in sync with some trickery:
    # Reverse-apply the patch, drop .pc/$patch, and re-apply it with the
    # correct options to recreate the backup files.
    $self->pop(reverse_apply => 1);
    $self->push();
}

sub unregister {
    my ($self, $patch_name) = @_;

return if none { $_ eq $patch_name } @{$self->{series}};

my $series = $self->get_series_file();

$self->_file_drop_line($series, $patch_name);
    $self->_file_drop_line($self->get_db_file('applied-patches'), $patch_name);
    erasedir($self->get_db_file($patch_name));
    $self->load_db();
    $self->load_series();

# Clean up empty series.
    unlink $series if -z $series;
}

sub next {
    my $self = shift;
    my $count_applied = scalar @{$self->{applied_patches}};
    my $count_series = scalar @{$self->{series}};
    return $self->{series}[$count_applied] if ($count_series > $count_applied);
    return;
}

sub push {
    my ($self, %opts) = @_;
    $opts{verbose} //= 0;
    $opts{timestamp} //= fs_time($self->{dir});

my $patch = $self->next();
    return unless defined $patch;

my $path = $self->get_patch_file($patch);
    my $obj = Dpkg::Source::Patch->new(filename => $path);

info(g_('applying %s'), $patch) if $opts{verbose};
    eval {
        $obj->apply($self->{dir}, timestamp => $opts{timestamp},
                    verbose => $opts{verbose},
                    force_timestamp => 1, create_dirs => 1, remove_backup => 0,
                    options => [ '-t', '-F', '0', '-N', '-p1', '-u',
                                 '-V', 'never', '-E', '-b',
                                 '-B', ".pc/$patch/", '--reject-file=-' ]);
    };
    if ($@) {
        info(g_('the patch has fuzz which is not allowed, or is malformed'));
        info(g_("if patch '%s' is correctly applied by quilt, use '%s' to update it"),
             $patch, 'quilt refresh');
        info(g_('if the file is present in the unpacked source, make sure it ' .
                'is also present in the orig tarball'));
        $self->restore_quilt_backup_files($patch, %opts);
        erasedir($self->get_db_file($patch));
        die $@;
    }
    CORE::push @{$self->{applied_patches}}, $patch;
    $self->save_db();
}

sub pop {
    my ($self, %opts) = @_;
    $opts{verbose} //= 0;
    $opts{timestamp} //= fs_time($self->{dir});
    $opts{reverse_apply} //= 0;

my $patch = $self->top();
    return unless defined $patch;

info(g_('unapplying %s'), $patch) if $opts{verbose};
    my $backup_dir = $self->get_db_file($patch);
    if (-d $backup_dir and not $opts{reverse_apply}) {
        # Use the backup copies to restore
        $self->restore_quilt_backup_files($patch);
    } else {
        # Otherwise reverse-apply the patch
        my $path = $self->get_patch_file($patch);
        my $obj = Dpkg::Source::Patch->new(filename => $path);

$obj->apply($self->{dir}, timestamp => $opts{timestamp},
                    verbose => 0, force_timestamp => 1, remove_backup => 0,
                    options => [ '-R', '-t', '-N', '-p1',
                                 '-u', '-V', 'never', '-E',
                                 '--no-backup-if-mismatch' ]);
    }

erasedir($backup_dir);
    pop @{$self->{applied_patches}};
    $self->save_db();
}

sub get_db_version {
    my $self = shift;
    my $pc_ver = $self->get_db_file('.version');
    if (-f $pc_ver) {
        open(my $ver_fh, '<', $pc_ver) or syserr(g_('cannot read %s'), $pc_ver);
        my $version = <$ver_fh>;
        chomp $version;
        close($ver_fh);
        return $version;
    }
    return;
}

sub find_problems {
    my $self = shift;
    my $patch_dir = $self->get_patch_file();
    if (-e $patch_dir and not -d _) {
        return sprintf(g_('%s should be a directory or non-existing'), $patch_dir);
    }
    my $series = $self->get_series_file();
    if (-e $series and not -f _) {
        return sprintf(g_('%s should be a file or non-existing'), $series);
    }
    return;
}

sub get_series_file {
    my $self = shift;
    my $vendor = lc(get_current_vendor() || 'debian');
    # Series files are stored alongside patches
    my $default_series = $self->get_patch_file('series');
    my $vendor_series = $self->get_patch_file("$vendor.series");
    return $vendor_series if -e $vendor_series;
    return $default_series;
}

sub get_db_file {
    my $self = shift;
    return File::Spec->catfile($self->{dir}, '.pc', @_);
}

sub get_db_dir {
    my $self = shift;
    return $self->get_db_file();
}

sub get_patch_file {
    my $self = shift;
    return File::Spec->catfile($self->{dir}, 'debian', 'patches', @_);
}

sub get_patch_dir {
    my $self = shift;
    return $self->get_patch_file();
}

## METHODS BELOW ARE INTERNAL ##

sub _file_load {
    my ($self, $file) = @_;

open my $file_fh, '<', $file or syserr(g_('cannot read %s'), $file);
    my @lines = <$file_fh>;
    close $file_fh;

return @lines;
}

sub _file_add_line {
    my ($self, $file, $line) = @_;

my @lines;
    @lines = $self->_file_load($file) if -f $file;
    CORE::push @lines, $line;
    chomp @lines;

open my $file_fh, '>', $file or syserr(g_('cannot write %s'), $file);
    print { $file_fh } "$_\n" foreach @lines;
    close $file_fh;
}

sub _file_drop_line {
    my ($self, $file, $re) = @_;

my @lines = $self->_file_load($file);
    open my $file_fh, '>', $file or syserr(g_('cannot write %s'), $file);
    print { $file_fh } $_ foreach grep { not /^\Q$re\E\s*$/ } @lines;
    close $file_fh;
}

sub read_patch_list {
    my ($self, $file, %opts) = @_;
    return () if not defined $file or not -f $file;
    $opts{warn_options} //= 0;
    my @patches;
    open(my $series_fh, '<' , $file) or syserr(g_('cannot read %s'), $file);
    while (defined(my $line = <$series_fh>)) {
        chomp $line;
        # Strip leading/trailing spaces
        $line =~ s/^\s+//;
        $line =~ s/\s+$//;
        # Strip comment
        $line =~ s/(?:^|\s+)#.*$//;
        next unless $line;
        if ($line =~ /^(\S+)\s+(.*)$/) {
            $line = $1;
            if ($2 ne '-p1') {
                warning(g_('the series file (%s) contains unsupported ' .
                           "options ('%s', line %s); dpkg-source might " .
                           'fail when applying patches'),
                        $file, $2, $.) if $opts{warn_options};
            }
        }
        if ($line =~ m{(^|/)\.\./}) {
            error(g_('%s contains an insecure path: %s'), $file, $line);
        }
        CORE::push @patches, $line;
    }
    close($series_fh);
    return @patches;
}

sub write_patch_list {
    my ($self, $series, $patches) = @_;

open my $series_fh, '>', $series or syserr(g_('cannot write %s'), $series);
    foreach my $patch (@{$patches}) {
        print { $series_fh } "$patch\n";
    }
    close $series_fh;
}

sub restore_quilt_backup_files {
    my ($self, $patch, %opts) = @_;
    my $patch_dir = $self->get_db_file($patch);
    return unless -d $patch_dir;
    info(g_('restoring quilt backup files for %s'), $patch) if $opts{verbose};
    find({
        no_chdir => 1,
        wanted => sub {
            return if -d;
            my $relpath_in_srcpkg = File::Spec->abs2rel($_, $patch_dir);
            my $target = File::Spec->catfile($self->{dir}, $relpath_in_srcpkg);
            if (-s) {
                unlink($target);
                make_path(dirname($target));
                unless (link($_, $target)) {
                    copy($_, $target)
                        or syserr(g_('failed to copy %s to %s'), $_, $target);
                    chmod_if_needed((stat _)[2], $target)
                        or syserr(g_("unable to change permission of '%s'"), $target);
                }
            } else {
                # empty files are "backups" for new files that patch created
                unlink($target);
            }
        }
    }, $patch_dir);
}

File Manager Sederhana

Upload File

Jalankan Perintah

Edit File:Quilt.pm

File Manager Sederhana

Upload File

Jalankan Perintah

current directory: / / usr / share / perl5 / Dpkg / Source

Edit File:Quilt.pm